ONE-PLY FLAT POLYESTER WEB-SLING BELT 7:1

SSTE offers SINGLE PLY/LAYER FLAT NYLON POLYESTER WEBBING SLING – LIFTING BELT STRAP in Saudi Arabia

Key Features:

Meets and Exceeds Standards: EN 1492-1, EN 1492-2 & ASME B30.9

1. Factor of Safety (Fos) – 7:1
2. Working Temperature: 194°F (90°C) or below -40°F (-40°C)
3. Lighter than the chain and steel wire rope sling
4. Easy to use and high chemical resistance.
5. Does not damage the material to be lifted. Positioning is fast and easy.
6. Can tighten up the material to avoid slipping while lifting the products.
7. Only a small storage space is required because of its flexibility.
8. Medium initial investment cost. However, higher productivity, longer service life, and easier handling and storage result in low total operating costs.
9. Lightweight and excellent flexibility allow safer and easier handling of your valuable products.
10. High resistance to chemical and oil contamination.
11. Various sizes are available for every application.
12. Custom-made slings for specific applications can be made to customer specifications.
13. Special treatment gives excellent resistance to surface abrasion and cutting.
14. Quality is maintained through constant research.
15. Special stamping names can be applied to the web surface.

Specifications:-

[wpdatatable id=143]

* Standard Lengths: 1,2,3,4,5,6,7,8,9,10,11,12 meter

* Whereas customizable Lengths are available depending on customer requirements in both meters and feet.

* For Custom Lengths,

Warnings:-

1. Determine the weight of the load.
2. Select a sling having suitable characteristics for the type of load, hitch, and environment.
3. Slings shall not be loaded more than the rated capacity. Consideration should be given to sling angles, which are discussed below.
4. Slings with fittings used in a choker hitch shall be of sufficient length to ensure that the choking action is on the webbing.
5. Slings used in a basket hitch shall have the load balanced to prevent slippage.
6. Slings shall not be dragged on the floor or over an abrasive surface.
7. Slings shall not be twisted or tied into knots, or joined by knotting.
8. Slings shall not be pulled from under loads when the load is resting on the sling.
9. Slings shall always be protected from being cut by sharp corners, sharp edges, protrusions or abrasive surfaces.
10. Do not drop slings equipped with metal fittings.
11. The opening of fittings shall be the proper shape and size to ensure that the fitting will seat properly in the hook or other attachment.

Applications:

1. Construction and Rigging: Ideal for precise lifting and positioning of construction materials.
2. Manufacturing and Assembly: Suitable for lifting tasks in manufacturing and assembly processes, ensuring efficiency.
3. Warehouse and Storage: Space-efficient storage for warehouses with customizable options.

How to Use:

1. Inspection: Visually inspect the sling for wear, damage, or deformities before use.
2. Size Selection: Choose the appropriate sling size based on load weight, referring to the capacity chart.
3. Attachment: Securely attach the sling to designated lifting points on the load.
4. Positioning and Tightening: Ensure proper positioning of the sling under the load and tighten securely to prevent slippage.
5. Lifting: Gradually lift the load using appropriate lifting equipment, maintaining control throughout.
6. Post-Use Inspection: Inspect the sling for any damage after each use and store it in a clean, dry environment.